Previously, I covered the basics of storage subsystem metrics and testing in my article Analyzing I/O Subsystem Performance for SQL Server, including an introduction of CrystalDiskMark 4.0. CrystalDiskMark was recently rewritten to use Microsoft DiskSpd for its testing, which makes it an even more valuable tool for your initial storage subsystem testing efforts. DiskSpd provides the functionality needed to generate a wide variety of disk request patterns, which can be very helpful in diagnosis and analysis of I/O performance issues with a lot more flexibility than older benchmark tools like SQLIO. It is extremely useful for synthetic storage subsystem testing when you want a greater level of control than that available in CrystalDiskMark.
MS SQL Server Benchmark and Stress Test Tools? Bsohn417 asked on 2007-06-29. Microsoft SQL Server 2005; Microsoft SQL Server; 4 Comments.
- It’s important to know your database performance and load handling capacity. One of the open source tool is JMeter which helps you assess performance. Please n ote that I am taking an example of.
- SQLStress - A SQL Server Stress Test Tool. SQLStress - A SQL Server Stress Test Tool. Home Overview Walkthrough Download ClickOnce Release Notes Support Disclaimer.
- SQLQueryStress is a simple, lightweight performance testing tool, designed to load test individual queries. It includes support for randomization of input parameters in order to test cache repeatability, and includes basic capabilities for reporting on consumed server resources.
- Stress Testing your SQL Server environments is a practice that can yield great benefits. Stress Testing can be used for performance tuning, to uncover bottlenecks, and for capacity planning among.
Now, we are going to dive a little deeper into how to actually use Microsoft DiskSpd to test your storage subsystem without using CrystalDiskMark 4.0. In order to do this, you’ll need to download and unzip DiskSpd. To make things easier, I always copy the desired diskspd.exe executable file from the appropriate executable folder (amd64fre, armfre or x86fre) to a short, simple path like C:DiskSpd. In most cases you will want the 64-bit version of DiskSpd from the amd64fre folder.
Once you have the diskspd.exe executable file available, you will need to open a command prompt with administrative rights (by choosing “Run as Administrator”), and then navigate to the directory where you copied the diskspd.exe file.
Here are some of the command line parameters that you will want to start out with:
| Parameter | Description |
| -b | Block size of the I/O, specified as (K/M/G). For example –b8K means an 8KB block size, which is relevant for SQL Server |
| -d | Test duration in seconds. Tests of 30-60 seconds are usually long enough to get valid results |
| -o | Outstanding I/Os (meaning queue depth) per target, per worker thread |
| -t | Worker threads per test file target |
| -h | Disable software caching at the operating system level and hardware write caching, which is a good idea for testing SQL Server |
| -r | Random or sequential flag. If –r is used random tests are done, otherwise sequential tests are done |
| -w | Write percentage. For example, –w25 means 25% writes, 75% reads |
| -Z | Workload test write source buffer size, specified as (K/M/G). Used to supply random data for writes, which is a good idea for SQL Server testing |
| -L | Capture latency information during the test, which is a very good idea for testing SQL Server |
| -c | Creates workload file(s) of the specified size, specified as (K/M/G) |
Table 1: Basic command line parameters for DiskSpd
You will also want to specify the test file location and the file name for the results at the end of the line. Here is an example command line:
This example command line will run a 30 second random I/O test using a 20GB test file located on the T: drive, with a 25% write and 75% read ratio, with an 8K block size. It will use eight worker threads, each with four outstanding I/Os and a write entropy value seed of 1GB. It will save the results of the test to a text file called DiskSpeedResults.txt. This is a pretty good set of parameters for a SQL Server OLTP workload.
Figure 1: Example command line for DiskSpd
Running the test starts with a default five second warm up time (before any measurements actually start), and then the actual test will run for the specified duration in seconds with a default cool down time of zero seconds. When the test finishes, DiskSpd will provide a description of the test and the detailed results. By default this will be a simple text summary in a text file using the file name that you specified, which will be in the same directory as the diskspd executable.
Here are what the results look like for this particular test run on my workstation.
Figure 2: Example DiskSpd test results
The first section of the results gives you the exact command line that was used for the test, then specifies all of the input parameters that were used for the test run (which include the default values that may not have been specified in the actual command line). Next, the test results are shown starting with the actual test time, thread count, and logical processor count. The CPU section shows the CPU utilization for each logical processor, including user and kernel time, for the test interval.
The more interesting part of the test results comes next. You get the total bytes, total I/Os, MB/second, I/O per second (IOPS), and your average latency in milliseconds. These results are broken out for each thread (four in our case), with separate sections in the results for Total IO, Read IO, and Write IO. The results for each thread should be very similar in most cases. Rather than initially focusing on the absolute values for each measurement, I like to compare the values when I run the same test on different logical drives, (after changing the location of the test file in the command line), which lets you compare the performance for each logical drive.
The last section of the test results is even more interesting. It shows a percentile analysis of the distribution of the latency test results starting from the minimum value in milliseconds going up to the maximum value in milliseconds, broken out for reads, writes, and total latency. The “nines” in the %-ile column refer to the number of nines, where 3-nines means 99.9, 4-nines means 99.99, etc. The reason why the values for the higher percentile rows are the same is because this test had a relatively low number of total operations. If you want to accurately characterize the higher percentiles, you will have to run a longer duration test that generates a higher number of separate I/O operations.
What you want to look for in these results is the point where the values make a large jump. For example, in this test we can see that 99% of the reads had a latency of 1.832 milliseconds or less.
Figure 3: Latency results distribution
As you can see, running DiskSpd is actually pretty simple once you understand what the basic parameters mean and how they are used. Not only can you run DiskSpd from an old-fashioned command line, you can also run it using PowerShell. DiskSpd also gives you a lot more detailed information than you get from SQLIO. The more complicated part of using DiskSpd is analyzing and interpreting the results, which is something I will cover in a future article.
15 questions total, 40 minutes maximum, for mid-level programmers
Programming test includes:
MS SQL Server - 15 Questions
- Joins, Queries
- Grouping, Aggregate Functions, HAVING Clause
- Subqueries, EXISTS, IN Operators
- Miscellaneous: Ranking Functions, Foreign Key, UNION Operator, NULLs
Custom Branding
Do you want the MS SQL Server coding test to match your own branding?
No problem! Use your company's domain and logo without any mention of Tests4Geeks.
Your applicants will think these programming assessment tests are all yours!
'They totally blow away the competition as far as a better product value.'
Maurice H. on Capterra.comBranded PDF Report
Are you recruitment firm? Send your clients branded reports of your candidates.
You'll make a great impression!
Reports are provided in PDF format, making them easy to read, share and print.
Ms Sql Server Stress Test Tool Free
F.A.Q.
1. Does every candidate have to answer the same questions?
Yes. MS SQL Server test consists of the same questions for every candidate.
In order to properly compare candidates, they need to answer questions of the same difficulty level, and different questions always mean different difficulty levels.
However, the order of questions and answers is randomized for each applicant.
2. How should I interpret the exam scores?
First of all, you need to keep in mind one very important thing:
The purpose of this MS SQL Server online test is not to help you find the best developers.
Its purpose is to help you avoid the worst ones.
For example, you have 5 candidates who get scores of 35, 45, 60, 65, and 80, based on a maximum possible score of 100.
We would recommend you invite the last three (those scoring 60, 65, and 80) to a live interview, not just the one who scored an 80/100.
3. Coding Test vs. Quiz
The test is presented in a multiple-choice, or quiz, format, rather than requiring test takers to write code.
If we used a coding test instead, we would have to check all answers manually, which would obviously be impossible.
4. What skill level is the test for?
The test is primarily created for mid-level developers.
5. What about junior and senior level developers?
The test can also be used to test junior programmers, but you should reduce your acceptance score drastically to compensate.
Sql Server Data Tools Download
Likewise, you can use it to test senior SQL developers as well, with an increased acceptance score.
Some will argue that it's pointless to judge senior developers based on a test meant for mid-level developers. This is generally true if you're looking for specific skills in a candidate rather than a broad base of expertise.
But at the same time, anyone can claim to be a senior developer on their resume. If you're concerned that candidates might be overstating their knowledge and accomplishments, this MS SQL Server skills test is a good way to determine which ones can actually deliver what they promise.
Made by Professionals
Lukas Eder
Oracle ACE Professional, Founder/CEO at Data Geeker GmbH
Allon Mureinik
Software Engineering Manager at Red Hat, SQL Expert
Alex Bolenok
True SQL Guru at StackOverflow, Author of Popular SQL Blog
Ben Thul
Database Engineer at SurveyMonkey working in the Bay Area, CA
Roman Pekar
Senior Database Developer with huge experience, working at Logex B.V.